Mx Ride Big Jumps: Step-by-Step Jumping Technique Guide - Tricks

Mx Ride Big Jumps: Step-by-Step Jumping Technique Guide

Learn how to hit big jumps in Mx Ride with throttle control, takeoff posture, mid-air correction, and landing technique tips for Roblox motocross riders.

2026-11-17
Mx Ride Wiki Team
Quick Guide
  • Mx Ride big jumps depend on straight takeoffs, stable throttle, and controlled body position.
  • Suspension setup changes how the bike leaves the lip and absorbs hard landings.
  • Air attitude should be corrected with small inputs, never abrupt mid-air changes.
  • Landing alignment matters more than jump distance—keep wheels matching the slope.
  • Practice progression: start on freeride areas before attempting motocross track doubles.

How Big Jumps Work in Mx Ride

Mx Ride is a Roblox motocross experience built around realistic throttle, clutch, gears, suspension, and body-weight physics. Unlike arcade racers, big jumps are not won by holding full throttle. They are won by preparing the takeoff, staying balanced in the air, and landing with the bike aligned to the ground.

Every large jump in the game follows the same physics loop:

Jump PhaseWhat Happens PhysicallyRider's Main Job
ApproachSpeed and line determine flight distanceSteady throttle, straight front wheel
TakeoffWeight transfers and the lip launches the bikeNeutral body position, no sudden inputs
Mid-AirBike rotates based on takeoff attitudeSmall corrections with body-position controls
LandingSuspension absorbs the impactAlign wheels with the slope, throttle ready
ExitWeight settles and traction returnsSmooth acceleration out of the landing
Why Small Jumps Matter First

Riders who skip fundamentals tend to land sideways on big lips. Complete dozens of clean small jumps in freeride areas before moving to track doubles—muscle memory for takeoff posture is what carries you over the big ones.

Jump Setup: Bike and Controls That Support Big Air

Your setup determines how forgiving a big jump feels. Suspension that is too soft bottoms out on landings; gearing that is too tall starves you of takeoff speed.

Beginner Balanced Setup

  • Moderate power delivery, easy to hold steady
  • Medium suspension absorbs imperfect landings
  • Best for learning jump rhythm safely

Track Racing Setup

  • Responsive power for strong takeoff speed
  • Firm, controlled suspension for repeated big hits
  • Reduced bike movement on hard landings

Freeride Stability Setup

  • Smooth power over changing terrain
  • Compliant suspension for uneven landings
  • Ideal for scouting big natural hits

Control settings matter just as much as bike tuning:

SettingRecommendation for Big JumpsReason
CameraThird-personBetter judgment of the lip and landing zone
Steering sensitivityLow to mediumPrevents oversteering on the approach
Throttle inputAnalog/progressiveFull-input spikes cause wheelies at the lip
Body-position controlsWithin easy reachYou need fast, small air corrections
GearPre-shift before the approachShifting on the lip unsettles the bike
Avoid Shifting on the Takeoff

Changing gears right at the lip transfers weight and can pitch the bike nose-down mid-air. Shift early, then hold a stable throttle through takeoff.

Step-by-Step: Hitting a Big Jump Cleanly

These steps combine the core riding fundamentals of Mx Ride into one repeatable jump routine.

1

Scout the jump first

Ride past the jump at low speed and read the lip shape, landing slope, and runout. Identify where you want the wheels to touch down before you ever hit it at speed.

2

Set your speed early

Reach your intended speed well before the approach, then hold a steady throttle. Chasing extra speed at the last moment ruins takeoff posture and often causes front-wheel lift or a nose-high launch.

3

Take off straight and neutral

Keep the front wheel pointed directly at the landing with your body position neutral. Any lean at the lip becomes rotation in the air, which is the most common cause of sideways crashes on big jumps.

4

Correct in small increments

Use brief body-position inputs to level the bike. If the nose is too high, press forward slightly; if too low, ease back. Abrupt corrections create uncontrolled rotation that you cannot recover before landing.

5

Land aligned and roll out

Match the wheels to the landing slope, let the suspension absorb the hit, and feed throttle back in gradually as traction returns. Do not pin the throttle the instant you touch down.

The Clean-Lap Rule

A jump only counts when you ride away with control. Prioritize clean, repeatable landings over maximum distance—consistent riders are faster over a full lap than riders chasing one huge hit.

Common Big Jump Mistakes and Fixes

MistakeSymptomFix
Full throttle into the lipWheelie at takeoff, nose-high flightEase throttle to about 80% on approach
Leaning at takeoffSideways rotation, missed landingSquare up the front wheel before the lip
Over-correcting mid-airUncontrolled spin, hard crashUse short taps of body position, not holds
Landing nose-downFront wheel washout or endoPress back slightly mid-air to level
Throttle on touchdownRear slides, bike swaps linesWait a beat, then feed throttle smoothly
Wrong gear on approachBogged takeoff, short distancePre-shift to a gear with strong mid-range drive
Watch the Front Wheel on Steep Lips

Steep takeoffs amplify throttle input. What feels like mild acceleration on flat ground can flip the bike backward off a sharp lip—reduce throttle more than you think you need on steep faces.

Practice Plan and Progression Goals

Use the different riding environments to build up to big jumps in a safe order. Pump tracks develop rhythm and momentum, freeride areas let you test terrain freely, and motocross tracks apply everything at speed.

Big Jump Progression Goals:

  • Link 10 clean rollers on a pump track without full throttle
  • Complete 20 stable small jumps in a freeride area
  • Land three consecutive jumps with zero mid-air over-correction
  • Clear a track tabletop jump with a steady approach throttle
  • Hit your first big double with aligned landing and smooth exit

A simple weekly structure keeps practice focused:

SessionFocus AreaTimeGoal
Session 1Pump track rhythm15 minMomentum without throttle abuse
Session 2Freeride small jumps20 minConsistent takeoff posture
Session 3Track tabletops20 minClean laps over medium jumps
Session 4Big jump attempts15 minOne controlled big jump at a time
Keep One Camera for Practice

Switching between first-person and third-person mid-practice resets your depth judgment. Pick third-person for jump practice and keep it until landings feel automatic.

FAQ

Q: Do I need full throttle for big jumps in Mx Ride?

No. Full throttle at the lip often causes a wheelie or nose-high launch that is hard to correct. Approach with a steady, slightly reduced throttle and a neutral body position for the most controllable flight.

Q: Which bike setup is best for big jumps?

A track racing setup with firm, controlled suspension handles repeated big landings best, but it demands precise control. Newer riders should learn on a balanced setup with medium suspension, which is far more forgiving on imperfect landings.

Q: How do I stop landing sideways on big jumps?

Sideways landings almost always come from leaning at takeoff. Keep the front wheel pointed straight at the landing zone and avoid steering input on the lip, then make only small body-position corrections in the air.

Q: Where is the best place to practice big jumps?

Start in freeride areas, where you can repeat the same jump at different speeds without race pressure. Once your takeoffs and landings are consistent, move to motocross tracks to apply the technique at full pace.

Keep Reading